
Friday, June 25, 2010
Friday, May 7, 2010
Spring 2010 updates
- All of this is made in the name of better handling, increased durability and safety. I would like to squeeze another one or two seconds from my ordinary "hot" lap at Ahvenisto racing circuit.
Friday, February 12, 2010
Motivation and blue skies for the winter
- Here is a nice blog for those who think small japanese fourbangers are smart pieces of engineering and cool to play with. Yes, its about Toyotas and souping up 4A-GEs. The basics of naturally aspirating engine tuning is the same and all the good advice written here apply to our B6- and BP- motors.
http://www.hachiroku.com.au/blog/?tag=ae86-tuning-guide
- And this is how all track races should look like! Tight matches, close (almost) contact and high pitching engine growl! Yes please:
http://www.youtube.com/watch?v=f3dTkMDQmC0
http://www.hachiroku.com.au/blog/?tag=ae86-tuning-guide
- And this is how all track races should look like! Tight matches, close (almost) contact and high pitching engine growl! Yes please:
http://www.youtube.com/watch?v=f3dTkMDQmC0
Hot and cold
- Now when the Finnish nature shows its best and there is plenty of snow even in the south most parts of Finland, it’s a bit hard to recall all last summer's overheating issues. But that's the way it was only three months ago.- I was leafing my old notes from previous driving seasons and to my surprise there was one or two bullets about high engine temperatures already in 2007 and 2008. Back then the only instrument to monitor coolant temp was the car's original temp gauge. Most of time needle stands straight up and too high temp can be observed as a slight tilt towards northeast.
- As I found myself spending more and more time on track I thought it would be a good idea to install a set of real instruments on top of dash. So I went to get two A'PEXi EL-series gauges: water temp and oil pressure.
- I can confirm that NA's (at least in my car) original water temp gauge is there just for show. Original's "normal temperature" = needle straight up means anything from 60-110 deg C. Well, actually that is just fine, but the scale is too rough for my purposes. On the other hand the oil pressure gauge in my 1991 MX-5 is decent. The only problem is that it hides behind the steering wheel, because mine is a bit smaller than the original.- Now I know that on track, if the day is warm – say +20-25 deg C, coolant temp rises to 100-110 deg C after five to eight hard laps. Even on very cool autumn afternoon, outside air temp showing little less than +10 deg C, the engine heats immediately to 95 deg C. And that's not all, oil temp rose to 110 deg C plus plus. How much above 110? I can't tell any better because the scale ended there.
Saturday, January 2, 2010
First of January 2010 in Finland
Subarctic sun at 2 pm. Some -15 deg. celcius by the Finnish Gulf.
Camera: Nokia 3210 classic mobile phone cam.
Wednesday, December 16, 2009
Functional exterior styling
- Old rims were pretty last season. Because they were working just fine they weren't first in my "mods to do" list. Last fall a guy in the tire shop noticed that two of them were totally "misaligned". Those two had to be installed on the rear axle to cause as little wobble as possible. But hey, now I had a perfect reason to start looking after new set of alloys.
- Lightness is the essence of MX-5. New rims had to be lighter than the old ones which wasn't much to ask. Old 15 x 7" Fond Metals weighted 8,5 kg each – not good. Original 14 x 5,5" seven spoke rims are very light tipping the scale at about 4,5 kg. Those numbers could be reached in today's aftermarket world only with very deep pockets if preferred size was somewhere in the 15"+ region.
- Another thing that I was after was some extra wideness to the car's track. Offset in my old Fond Metals was -37 mm. I wanted to get about +10 mm extra width on each side. Spacers could have been one solution but I decided to try to find right rims for my purposes.
- So back and forth in the internet I went. Supply is huge. There are so many different marks with different specs. One can't argue with the specs, light is light and so on. Looks is something to discuss but someone's ugly is other one's pretty. ATS Super Light DTCs were looking great to me. In 15 x 8" size and -35 mm offset they also served the functional part of the deal.
- Mass came down 2 kilos each. They weren't the lightest ones but looked the best and specs were perfect. They also look good in place and really make the car look planted and ready to go!
- Lightness is the essence of MX-5. New rims had to be lighter than the old ones which wasn't much to ask. Old 15 x 7" Fond Metals weighted 8,5 kg each – not good. Original 14 x 5,5" seven spoke rims are very light tipping the scale at about 4,5 kg. Those numbers could be reached in today's aftermarket world only with very deep pockets if preferred size was somewhere in the 15"+ region.
- Another thing that I was after was some extra wideness to the car's track. Offset in my old Fond Metals was -37 mm. I wanted to get about +10 mm extra width on each side. Spacers could have been one solution but I decided to try to find right rims for my purposes.- So back and forth in the internet I went. Supply is huge. There are so many different marks with different specs. One can't argue with the specs, light is light and so on. Looks is something to discuss but someone's ugly is other one's pretty. ATS Super Light DTCs were looking great to me. In 15 x 8" size and -35 mm offset they also served the functional part of the deal.
- Mass came down 2 kilos each. They weren't the lightest ones but looked the best and specs were perfect. They also look good in place and really make the car look planted and ready to go! Summer 2009 starts
- I finally got those so much anticipated first kilometres to the odometer after having engine rebuild finished in the summer. First impression was good. Engine was running nice, although idle was anything but stabile. Negotiating traffic lights with running engine required constant tap dancing with pedals and left foot braking. Some adjustments and fine tuning did the job and the tach needle settled. And now after some 2000 km and some fine tuning later it seems that idle has calmed down even more. Lesson lerned: don't fiddle with throttle body's basic settings...- What about the new nature of my power plant? It's more responsive and revhappier than before. Usable torque has increased significantly also. Thanks goes to increased compression ratio and displacement. 81 mm vs. 78 mm diameter mugs make some difference!
- Lighter flywheel might have something to do with previously mentioned challenging idle. Super light flywheel, to be exact! Weight of the original's 7 kilograms went down to 3,6 kg. That can really be felt of better rev pickup and faster gear shifts. - So, 2009 season finally got started and I had my fair share of growling intake noise penetrating the sun roof cockpit. Nice!
Subscribe to:
Posts (Atom)





